1988 Defender 110 Custom Soft Top CTT Camel Trophy Tribute - Support Truck Project - featured at SEMA 2018
- 1988 Land Rover Defender 110
- 3-Door Soft Top
- Sandglow with Camel Trophy Tribute Decals
- Original Factory Configured Left Hand Drive
- Project build included full body removal of military paintwork using water-cooled blast media, professional prep, prime, and paint, restoration, modification, and overland/Camel Trophy Tribute kitting for SEMA 2018 Autohome International Display booth
- Project testing and photography November 2018 (Baja 1000), May 2019 Overland Expo (Flagstaff AZ)
- More than $25K of new accessories installed/included (lighting/tent/racks/accessories)
- Optional reduced cost engine conversion pricing available as variations in the drop down configuration menu
- Vision X Roof Rack Mounted 6.5" CG2 LED Light Cannon (x2)
- Vision X Roof Rack Mounted 6.5" CG2 Multi-LED Light Cannon (x2)
- Vision XBrush Guard Mounted 6" Optimus Dual 60 degree Flood Lights (x2)
- LED Winch Work-light (x1)
- Vision X 7" Vortex LED Headlight (x2)
- ROW LED Replacement Bulbs for Turn signal, Running Lights, stop lamps, and plate light
- LED Replacement Bulbs interior dash lighting and gauges
- Hella Interior goos-neck Map Light with LED amber conversion (X1)
- Vision X Interior Touch Activated Lighting (x2)
- Vision X Overhead Cabin Lighting (X2)
- Vision X Rear Cargo Lighting (X1)
- Vision X Rear 4.5" Round Utility Worklamp (X1)
- Vision X Rear 3.4" Utility Flood/ Red Fog Lighting (X1) in DNW custom surround fixture
- Vision X Rear 3.4" Utility Flood Backup Lighting (x1) in DNW custom surround fixture
- LED Under bonnet Work lighting (x1)
- Lighting Controllers and wiring Kit
- Hella Micro relay wired switch console
- Custom Dash switch panel SDO aluminum surround with RAM mounting tapped ball sockets for nav/com mounts
- Blade Fuse conversion completed
- DNW Cleanbum panel conversions front and rear
- DNW dual battery system with cutoff switch installed
- Engine exchange completed in November 2017 - pricing options available for engine configuration upgrades (200tdi, or 300tdi)
- New rubber seals (doors, vents, rear)
- New genuine Land Rover tailgate with antiluce latches
- New civilian spec door and rear view mirror conversion
- New Genuine Land Rover 2-pc doors
- Lighting converted to new ROW fixtures
- New headlight surrounds
- New ROW grille
- Blasted to bare metal and professionally painted in LR Code correct Sandglow
- Eyebrow kit installed
- Custom Slimline Roof Rack attached to fabricated mounting brackets on roll cage.
- 45L onboard water storage
- 40L fuel storage includes NATO fuel can (x2)
- Color matched Chequerplate on bonnet and wings (paint on wing top under)
- Genuine Camel Trophy brush guard - refurbished and painted
- Terrafirma Commercial Winch Bumper with custom mounting for center drum winch
- Color matched road wheels with Michelin XZL tyres
- MOD Wolf Radio Truck soft top, vinyl canvas with wire ports
- New Exmoor Galvanized Door Top surrounds and stick set with stainless steel or grade 8.8 hardware
- One-piece aluminum sills - slider upgrade available at additional cost
- Wright Off-Road Matting installed
- Camel Trophy Flex Map light with LED conversion
- Camel Trophy Grab bar fabricated and mounted
- Consumer spec dash conversion from MOD dash & lighting
- Fabrication and installation of galvanized wire mesh insect screen
- Custom load bay Slimline II rack
- New Seatbelts
- Additional center seat section added
- Custom Knightsbridge Overland Seat Covers with DNW Camel Tribute Embroidery
Accessories:
- Custom built Autohome Airtop Roof Tent- Medium (special build with additional door for access through front of truck)
- Frontrunner Maggiolina Autohome Mounting Kit
- Custom 2" webbing cargo net mounted above load bay with stainless steel ring hardware
- FrontRunner 45L onboard water carrier mounted into driver/side locker
- 4 x 20L Wavian fuel/water cans and carriers mounted to roof rack, carriers modified to fit Frontrunner rack
- 2 x Frontrunner crossbar kit fabricated mounting through soft top to allow tent mounting
- Load Bay weighted matting for protection and noise reduction
- Maxtrax traction aids with mounting pins (2 sets)
- Aluminum roof storage box - tie downs and stainless mounting eyes
- Warn Zeon 10K Winch with Synthetic Spyder cable
Suggested Additional Work:
- Age appropriate condition of the truck undercarriage and driveline suggest axle/brake service
- Engine conversion to 300tdi or 200tdi with overdrive suggested for more effective on road use - optional conversion pricing is available as variations in the drop down configuration menu
- Drawer system and platform storage build at front of load bay
Please contact us for purchase details:
Non-Refundable deposit required for off-site inspection and sale, balance due within 7 days, cash/certified funds price does not include delivery. 1988 Defender imported and restored-customized in USA, registered in WA with US title.
All vehicle sales are offered on consignment through Defenders Northwest LLC and are sold by owner as-is, where-is, without warranty, without guarantee, without any statement or expectation of condition by Defenders Northwest LLC. We suggest that any antique vehicle should be inspected prior to purchase as all will have at minimum some apologies and may require extensive restoration or repair work depending on conditions and the objectives of the new owner.
A $1000 non-refundable Purchase Hold and off-site inspection deposit is required to hold the vehicle for up to 14 days for viewing, inspection, or funds transfer. Viewing and test drives available by appointment from Defenders Northwest Gig Harbor location.
Please note pricing is based on Gig Harbor pickup location and payment type, please contact us directly if you would like a delivery quote based on an alternate location or pickup date. Upgraded engine conversion and installation options are available at discounted rates for initial purchase only.